United Office UAV 380 A1 - Manual (Page 25)

- 23 -
Technical data
Mains voltage: 220-240 V ~, 50 Hz
Nominal current: 1,8 A
Rated output: 380 W
Protection class: II
Collector container: 21 liters
Cutting process
for Paper:
Crosscut, 4 x 18 mm particles
Safety Level 3
Working width: 223 mm
Overheating Protection
This appliance is fitted with overheating protection.
Should the motor become too hot due to excessive
loading, the appliance switches itself off automati-
cally. GIn this case proceed as follows:
• Switch the appliance off by placing the switch w
in the middle position (OFF).
• Empty the collection container t / u .
• Allow the appliance to cool down.
• Insert the plug back into the mains power socket.
• Switch the appliance on by placing the switch
w
in the position .
We recommend that, after 3 minutes continuous
use, you allow the appliance to cool down for ab-
out 30 minutes.
Items supplied
Document Shredder
Operating Instructions
Appliance description
q Cutter attachment
w Switch
e Cutter opening for CD/Credit cards
r Cutter opening for paper
t Large waste receptacle (Paper)
y Power cable
u Small waste receptacle (transparent) /
Viewing window
Commissioning
Note: As every paper shredder is tested for
functionality after manufacture, it may happen
that some paper shreds remain in the cutting
blades.
• First of all, place the cutter attachment q onto
the large waste receptacle t so that the power
cable y is located at the rear, i.e. on the closed
side.
• Connect the paper shredder to a power socket.
IB_71853_UAV380A1_LB5 14.11.2011 10:00 Uhr Seite 23