Electrolux ETV45000X User Manual

Page 12

English - 11 -

Component Video Inputs (YpBPr) are used for connecting component video.

You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the COMPONENT VIDEO INPUTS on
the TV and the component video outputs of your device. While connecting, be sure that the
letters on your TV, “Y”, “Pb”, “Pr” correspond with your device’s connectors.

Use an appropriate RCA cable to connect the set to a subwoofer unit.

SCART 1 inputs or outputs for external devices.

RF Input connects to an antenna or a cable.

Note that if you use a decoder or a media recorder, you should connect the aerial cable
through the device to the television with an appropriate antenna cable, as shown in the
illustration below.

CI Slot .

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you
subscribe to. For more information, see “Common Interface” section.

ENG-19796W-1050UK-17MB24H-IDTV-(BACK LINE OUT-YPbPr-WO SVHS)-LIPS-50118956.p65 25.04.2008, 10:06