Emerson Radio MS7608 - Manual (Page 16)

15
6.) Repeat Step 5 until you have entered up to 20 tracks in the memory.
7.) Press the PLAY/PAUSE button to begin programmed playback. The PLAY
indicator appears together with the PROGRAM
indicator. Playback will begin on the first
programmed track and continue until all of the
programmed tracks have been played.
Note: If the / SKIP/SEARCH button are pressed during programmed
playback the player will skip forward or back to the next track in the programmed
sequence, not the next track on the disc.
After all of the programmed tracks have been played the player stops and the PLAY
indicator disappears. But the PROGRAM indicator remains in the display and the
programmed sequence remains in the memory. If you press the PLAY/PAUSE
button the programmed sequence will play again. To cancel the program from
memory press the STOP button again. The PROGRAM indicator disappears.
Programmed Repeat Playback
To repeat a programmed sequence continuously,
first enter the desired tracks in the program memory
as described above, then press the REPEAT button
twice so that the PROGRAM and REPEAT indicators both appear in the display, and
press the PLAY/PAUSE button to begin playback.
MUTE
To shut off the sound of the radio or the CD temporarily press the MUTE button on
the remote control. The speakers shut off and the MUTE LED indicator flashes.
Press the MUTE button again to cancel mute and restore the sound. The MUTE
LED indicator goes 'Off'.
STEREO HEADPHONE JACK
For private listening without disturbing others connect a set of stereo headphones
(not included) to the PHONES Jack on the left side panel. The built-in speakers
automatically shut off when stereo headphones are connected to the headphone
jack. When using stereo headphones always start with the volume control set to a
low level and gradually increase until you find the desired level.
PROGRAM
PLAY
PROGRAM
PLAY
REPEAT
MS7608_ib061802.p65 17/6/2002, 15:22 15