Tronic TLG 1000 A1 - Manual (Page 4)

- 2 -
ALL-PURPOSE BATTERY
CHARGER
Intended Use
The All-Purpose Battery Charger is intended
exclusively for:
• for the charging of rechargeable Ni-Cd and
Ni-MH batteries with the sizes AAA/AA/C/D
and 9 V block batteries to standard commercial
rating capacities.
• domestic use only, it is not intended for commer-
cial applications.
Items supplied
• All-Purpose Battery Charger
• Operating manual
Description of the appliance
q Charging slots for 9 V Block batteries
(Charging slots 5 and 6; see fold-out side)
w Charging slots for AAA / AA / C / D batteries
(Charging slots 1 to 4; see fold-out side)
e LEDs (Operating status indicator)
Technical data
Input Voltage: AC 100 - 240 V ~
60/50 Hz
Power consumption: 350 mA
Protection class: II /
Operating temperature: 0°C - 25°C
Storage temperature: -20°C - 50°C
Output voltages:
6 x 1.4 V
(Charging slots 1-4)
2 x 9 V
(Charging slots 5-6)
Charging currents:
6 x 400 mA (Type AAA)
6 x 1000 mA (Type AA)
4 x 1000 mA (Types C or D)
2 x 70 mA (9 V Block battery)
Safety instructions
Fire hazard!
Do not place the Battery Charger:
• where it would be subject to direct sunlight.
It could happen that the Battery Charger over-
heats and becomes irreparably damaged.
• in close adjacency to sources of heat. This inclu-
des for example ovens, fan heaters and similar
appliances, as well as the ventilation openings
of electrical devices. The Battery Charger could
be irreparably damaged.
• in damp environments or in the vicinity of water.
Moisture could permeate into the Battery Charger.
There would then be the danger of receiving an
electric shock and or causing a fire!
• Only charge rechargable batteries of the types
„Ni-Cd“ and „Ni-MH“. NEVER recharge batteries
of other types or non-rechargable batteries.
These are not suitable for recharging. Batteries
not suitable for recharging can overheat and
explode. It could irreparably damage the
Battery Charger and the inserted batteries.
There is also a risk of personal injury!