beautypg.com

Technical data, Risk of fire, Notice regarding disconnection from mains-power – Tronic TSW 300 A1 User Manual

Page 5: Risk of personal injury

background image

- 3 -

Risk of fire!

• Do not use the device near hot surfaces.
• Do not locate the device in places exposed to

direct sunlight, Otherwise, it may overheat and
become irreparably damaged. Do not operate
the device in a vehicle that is standing out in the sun.

• Do not leave the device unattended when in use.
• Do not cover the fan's ventilation slots when the

device is switched on.

• Do not place any open sources of fire, like candles,

on the device.

• Both connection cables can become heated

when subjected to heavy loads.

• Due to high crossover resistances heating of the

plug in connector can result when using the cables
with a 12 V vehicle plug. Therefore when operating
with high loads use the connection cable with
the connection terminals.

Notice regarding disconnection
from mains-power

• This device's on/off switch does not completely

disconnect the device from the vehicle's power
and/or the battery. When the vehicle plug is
connected power is still supplied to the device.
To completely disconnect the device from the
vehicle power the 12 V vehicle plug must be re-
moved from the vehicle socket or the connection
terminals removed from the automobile battery.

Risk of personal injury!

• Do not operate the device if it has fallen or is

damaged. Have the device checked and repaired
if necessary by qualified technicians.

Technical data

DC Input

Voltage:

12 V

Maximum voltage:

15,6 V

Maximum power
consumption:

40 A

Low voltage alarm:

at 10,5 ± 0,3 V

Low voltage shutdown:

at 10 ± 0,3 V

Over voltage shutdown: at 16 ± 0,5 V

AC Output

Voltage:

220-240 V ~ 50 Hz

Output power:

1,3 A

Continuous load:

max. 300 W

Peak load:

max. 600 W/0,1 s

Efficiency ( ):

approx. 82 %

Output wave form:

modified sine

Overload protection:

>= 320 W

Temperature shut off:

at 65°C ± 5°C

USB Port

Voltage: 5

V

Output current:

500 mA

Fusing

Power inverter:

40 A Car-type fuse

General data

Measurements (without vehicle plug)
(L x B x H):

188 x 127 x 61 mm

Weight (without cable): 865 g approx.
Operating temperature: 5...40 °C
Operational humidity:

0 - 80 %
(relative humidity
no condensation)

Subject to technical changes!

IB_61167_TSW300A1_GB_LB3.qxd 17.01.2011 14:04 Uhr Seite 3