Tronic TLG 500 B1 - Manual (Page 49)

46 TLG 500 B1
GB
MT
Troubleshooting
In this section you will receive important information for the localisation and
remedying of malfunctions.
Malfunction causes and remedies
The following table will help with localising and remedying minor malfunctions:
Defect Possible cause Solution
The battery
charger is not
functioning.
The power cable is not
plugged in. Insert the power cable into a mains
power socket.
Mains power socket is not
supplying power.
Check the circuit fuse.
The inserted
batteries are not
being charged.
The batteries are not inserted
as per their polarity. Insert the batteries as per their polarity
(see marking in the loading slot ).
The inserted batteries are
not suitable for charging.
Insert exclusively rechargable Ni-Cd
and Ni-MH batteries of the types
AAA/AA/C/D and 9 V Block batteries.
The temperature monitoring
was initiated.
Disconnect the plug from the mains
power socket and allow the device to
cool down.
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Services.
Appendix
Information regarding the EC Declaration of Conformity
With regard to conformity with essential requirements and
other relevant provisions, this device complies with the
guidelines of the Electromagnetic Compatibility Directive
2004/108/EC as well as the Directive for Low Voltage
Devices 2006/95/EC.
The complete original Declaration of Conformity can be
obtained from the importer.
IB_102808_TLG500B1_LB5.indb 46 IB_102808_TLG500B1_LB5.indb 46 01.10.14 14:33 01.10.14 14:33