Emerson Radio HD2700 User Manual

Page 11

PROGRAMMED PLAYBACK

You can program the player to play only the tracks that you want to hear, in the
specific order that you want to hear them. Up to a total of 24 tracks can be
programmed. You may program certain tracks to play more than once if desired.

IMPORTANT: The player can only be programmed when it is in the Stop mode
and the total number of tracks and playing time appear on the display. If the
display is blank press the PLAY/PAUSE

button to start the disc. When playback

begins press the STOP

button. If the disc was playing, press the STOP

button so that the total tracks and playing time appear on the display.

1. While the total tracks and playing time appear on

the display press the PROG (Program) button.
"PROG" indicator flashes and Program No. "P - 01"
appears.

2. Press SKIP FWD

or SKIP REV

button until

the first track to be programmed appears in the
display.
Example: Track # 7.

3. Press the PROG (Program) button again to enter

the selected track in the memory. The track indicator
returns to a "00" and the Program No. advances to
"P - 02".

4. Repeat Steps 2 and 3 until you have entered up to a total of 24 tracks in the

memory.

5. Press the PLAY/PAUSE

button to begin

programmed playback. The “PROG” indicator stops
flashing and remains in the display. The player will
play the tracks you selected in the programmed
order. When the last track has played the player
stops and the total tracks and playing time appear.

6. To cancel programmed playback press the STOP button twice. The program

will also be canceled if the CD Door is opened or if the power is interrupted.

PROG

HD2700_ib.p65

21/11/2001, 15:46