Setting up and connecting to the, Setting up and connecting to the power supply, Safety instructions – Rocktrail Car Cool Box RABB 12 A1 User Manual
Page 9: Items supplied and initial inspection, Unpacking, Disposal of packaging
6
Setting up and connecting to the ...
RABB 12 A1
GB
Setting up and connecting to the power supply
Safety instructions
WARNING
During the commissioning of the appliance personal injury and
property damage could occur!
Observe the following safety notices to avoid these risks:
►
To avoid damage to people and property, pay heed to the requirements
for the installation site and the electrical connection of the appliance.
Items supplied and initial inspection
The appliance is supplied with the following components as standard:
●
Car cool Box RABB 12 A1
●
Connection cable with car plug
●
Carrying strap
●
Spare fuse for the car plug
●
Operating Instructions
NOTICE
►
Check the contents to ensure everything has been provided, and for signs
of visible damage.
►
If the contents are incomplete, or have been damaged due to defective
packaging or transportation, contact the Service Hotline (see chapter Service).
Unpacking
♦
Remove all parts of the appliance and these operating instructions from the box.
♦
Remove all packaging material and pull the protective foil on the control
panel off .
DANGER
►
Packaging material should not be used as a play thing by children. There is
a risk of suff ocation.
Disposal of packaging
The packaging protects the appliance against transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw materials
and reduces the amount of waste generated. Dispose of packaging material that
is no longer needed according to the regionally established regulations.
Buch_61537_LB4.indb Abs3:6
Buch_61537_LB4.indb Abs3:6
24.01.12 17:29
24.01.12 17:29