Light settings, How to use – Rocktrail Z30693 User Manual
Page 11
11
GB
How to use
Charge the torch by turning the crank
handle
1
either clockwise or anti-
clockwise. Keep cranking for at least
2 minutes to charge the rechargeable
battery. Recharge the rechargeable
battery after each use of the selfpow-
ered LED torch. Deep discharge of
the rechargeable battery can dam-
age it. After charging, fold the crank
handle
1
in again under the torch.
The torch shines with all three LEDs
2
illuminated for about 10 minutes.
Q
Light settings
j
Press the ON/OFF switch
3
to change
between the different light settings:
– 1 LED
2
only
– 3 LEDs
2
– 3 flashing LEDs
2