Elo TouchSystems ET2239L - Manual (Page 8)

Elo TouchSystems ET2239L User Guide 8
Interface Connection
To connect your touchmonitor to your computer:
1 Connect the power cable to the rear panel of the monitor and the
other end to the power outlet.
2 Connect either the USB cable OR the serial cable to the rear
panel of the monitor. Note: Do not use both. Connect the other
end to your computer.
3 Connect the video cable and/or the DVI-D cable to the rear panel
of the monitor. Tighten by turning the two thumb screws clockwise
to ensure proper grounding. Connect the other end to your
computer.
4 Connect the OSD control box to the monitor.
5 Press the power button on the rear panel to turn the monitor on.
Connector Panel on Rear side of Monitor
Analog Video
Cable
OSD box
connector
Power Cable Power
Button
USB cable DVI-D cable
(not included with
ET2239L-xxxx-x-
A-x models)
Serial Cable (not
included with
ET2239L-Axxx
models)