Swing assembly – Playtive Swing StyleC User Manual
Page 20

22
GB
• An adult must perform the installation. 
• An adult must check the stability after installation.
• Only install the swing as described in these instructions, other methods of 
 fastening may damage the cord or the holding element.
• An adult must inspect the fastening of the cords, the knots in the cord 
 beneath the swing unit, the hooks and the rings 
before each use.
 Discontinue use of the swing as soon as the fastening element of the swing 
 becomes brittle and you can see the metal on the inside. 
• Do not use the swing near stairs. 
• The product may only ever be used by one person. 
• Fasten the swing leaving enough space from other objects so that no one 
 can be injured. Pay attention to the radius that the swing makes when it 
 swings. 
• Make sure that there are no hard objects or objects with sharp edges in 
 the area of the swing.
• Do not fasten the swing over concrete, asphalt or any other hard surfaces. 
• Use the appropriate fastening material (see Swing Assembly) for each 
 installation in wooden or metal equipment as well as in concrete ceilings. 
• The fastening hooks must be completely inserted through the wood and 
 fixed by a locknut from above when fastening into wooden equipment or 
 wooden beams. 
Swing Assembly
Tip 
Only fasten the swing to equipment for which you can guarantee adequate 
strength with absolute confidence. To prevent unintentional detachment use 
10mm strength screw hooks minimum for assembly, which are bent by at least 
540° or which are completely closed. The fastening hooks must be complete-
ly inserted through the wood and fixed by a locknut from above in wooden 
beams to accomplish an adequately secure connection.
