Swing assembly – Playtive Swing Brettschaukel User Manual
Page 19
21
GB/MT
• An adult must perform the installation.
• An adult must check the stability after installation.
• Only install the swing as described in these instructions, other methods of
fastening may damage the cord or the holding element.
• An adult must inspect the fastening of the cords, the knots in the cord
beneath the swing unit, the hooks and the rings
before each use.
Discontinue use of the swing as soon as the fastening element of the swing
becomes brittle and you can see the metal on the inside.
• Do not use the swing near stairs.
• The product may only ever be used by one person.
• Fasten the swing leaving enough space from other objects so that no one
can be injured. Pay attention to the radius that the swing makes when it
swings.
• Make sure that there are no hard objects or objects with sharp edges in
the area of the swing.
• Do not fasten the swing over concrete, asphalt or any other hard surfaces.
• Use the appropriate fastening material (see Swing Assembly) for each
installation in wooden or metal equipment as well as in concrete ceilings.
• The fastening hooks must be completely inserted through the wood and
fixed by a locknut from above when fastening into wooden equipment or
wooden beams.
Swing Assembly
Tip
Only fasten the swing to equipment for which you can guarantee adequate
strength with absolute confidence. To prevent unintentional detachment use
10mm strength screw hooks minimum for assembly, which are bent by at least
540° or which are completely closed. The fastening hooks must be complete-
ly inserted through the wood and fixed by a locknut from above in wooden
beams to accomplish an adequately secure connection.