Ordex Z29776 User Manual
Page 9
9
GB/MT
Introduction / Safety information / Assembly / Cleaning and Care
Fabric Wardrobe
Q
Introduction
Please familiarise yourself with the product prior to assembly.
Carefully read the following assembly instructions and safety tips.
Only use the unit as described and for the specified applications.
Store these instructions in a safe place. If passing this product on to a third
party also include all documents.
Q
Intended use
This product is designed for storing clothes and other objects in dry indoor
areas. Any use other than the aforementioned or any product modification is
prohibited and can lead to injuries and / or product damage. The manufacturer
is not liable for any damages caused by any use other than its intended purpose.
This product is not intended for commercial use.
Q
Description of parts
A
Connecting element, top and bottom
B
Connecting element, middle
C
Horizontal connecting rod (approx. diameter 1.6 x 73.5 cm)
D
Vertical connecting rod (approx. diameter 1.6 x 32.4 cm)
E
Vertical connecting rod, bottom (approx. diameter 1.6 x 67 cm)
F
Vertical connecting rod, top, with borehole (approx. diameter 1.6 x 67 cm)
G
Vertical connecting rod, top, (approx. diameter 1.6 x 67 cm)
H
Supporting bar (approx. diameter 1.6 x 45 cm)
I
Clothes rail (approx. diameter 1.9 x 73.5 cm)
J
Screw (M6 x 26 mm)
K
Washer
L
Cover
M
Shelf
N
Cross-head screw
O
Dowel
P
Shelf support
Q
Scope of delivery
Immediately after unpacking, check the scope of delivery for completeness
and that the product and all its parts are in perfect condition. On no account
should you assemble the product if the scope of delivery is not complete.
4 x Connecting element, top and bottom
2 x Connecting element, middle
8 x Horizontal connecting rod (approx. diameter 1.6 x 73.5 cm)
4 x Vertical connecting rod (approx. diameter 1.6 x 32.4 cm)
4 x Vertical connecting rod, bottom (approx. diameter 1.6 x 67 cm)
2 x Vertical connecting rod, top, with borehole (approx. diameter 1.6 x 67 cm)
2 x Vertical connecting rod, top (approx. diameter 1.6 x 67 cm)
2 x Supporting bar (approx. diameter 1.6 x 45 cm)
1 x Clothes rail (approx. diameter 1.9 x 73.5 cm)
4 x Screw (M6 x 26 mm)
4 x Washer
1 x Cover
3 x Shelf
2 x Cross-head screw
2 x Dowel
2 x Shelf support
1 x Assembly instructions
Q
technical data
Dimensions: approx. 75 x 170 x 50 cm (W x H x D)
Material:
Frame: Metal
Cover: Non-woven fabric
Max. load: Clothes rail: 10 kg
Top shelf: 8 kg
Safety information
PLEASE READ THE ASSEMBLY INSTRUCTIONS BEFORE USE! PLEASE
KEEP THE ASSEMBLY INSTRUCTIONS IN A SAFE PLACE!
J
WArnInG!
rISk OF LIFe AnD AccIDentS In
InFAntS AnD cHILDren! Never leave children unattended
with the packaging material. Risk of suffocation. Keep children
away from the product.
m cAUtIOn! rISk OF InJUrY! Ensure all parts are undamaged and
correctly assembled. Incorrect assembly poses the risk of injury. Damaged
parts may affect safety and function.
m cAUtIOn! Do not leave children without supervision. The product is
not a climbing frame or toy. Take care that nobody, particularly children,
stands on the product or pulls themselves up on it. The product can tip
up. This can result in injury and / or damage.
J
Make sure that the product is standing on a solid, even surface. Injury
and / or damage to property may otherwise occur.
J
cAUtIOn! FIre HAzArD! Do not place the product
anywhere near an open fire.
J
Keep the product away from water and moisture. Damage may otherwise
occur.
J
Do not expose the product to direct sunlight. The colours can fade.
J
Loads must be applied evenly to the product to prevent it from tipping up.
J
Do not exert any pressure or load any weight from above on the product.
Take care that weight is distributed evenly on the clothes rail and in the
top shelf.
J
Make sure that the load on the clothes rail does not exceed max. 10 kg
and max. 8 kg on the top shelf. The product can otherwise tip up. This
can result in injury and / or damage.
J
Do not attach any weight to the underside of the cover. This could damage
the cover.
m cAUtIOn! rISk OF InJUrY! Do not under any circumstances use
the wardrobe if it is damaged.
m cAUtIOn! DAnGer OF eLectrIc SHOck! Before installation
please ensure that there are no concealed wiring where you are intending
to drill.
m cAUtIOn! WAter DAMAGe! Before installation please ensure that
there are no concealed water pipes where you are intending to drill.
J
Make sure that the wardrobe is only assembled by competent persons.
J
Make sure that all connections are fitted together securely and check all
joints for stability.
Q
Assembly
j
Assemble the wardrobe as shown in Figures 1 - 5.
Q
cleaning and care
j
Use a dry, non-fluffing cloth for cleaning and care of the product.
j
To remove more stubborn dirt, use a slightly dampened cloth and a mild
washing-up liquid if necessary.
j
Do not under any circumstances use corrosive cleaning agents. This can
damage the material of the product.