Epic Fitness Epic VIEW 550 ECTL09706.1 - Manual (Page 10)

10
8. Note the location of the 75 ohm antenna terminal
and the audio/video input jack on the treadmill.
For the television to operate, the included
Audio/Video Wire Harness (115) and your DVD
player or VCR must be connected to the
audio/video input jack on the treadmill, a personal
audio/video player must be connected to the
audio/video jack on the console, or an antenna, a
CATV cable, or a VCR must be connected to the
75 ohm antenna terminal (see page 12).
8
9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see page 23).
To protect the floor or carpet
from damage, place a mat under the treadmill.
75 Ohm
Antenna
Terminal
7. Slide the Right Upright Sleeve (96) up against
the console assembly. Attach the Right Upright
Sleeve with two 3/4" Screws (4).
Attach the Left Upright Sleeve (not shown) to the
Left Upright (73) as described above.
73
4
96
4
7
Audio/
Video
Input
115