Gear box assembly – Echo HC-155 User Manual

Page 22

1. Move stop switch to stop position.

2. Disconnect spark plug wire from spark plug.

3. Brush loose debris from blade and coat both sides of blade with the

50-50 cleaning mixture.

4. Allow cleaning mixture to soften the remaining gummy residue then

wipe it from the blade.

5. Apply clean oil to the entire length of the blade. Be certain the

blade bolts are lubricated.

6. Wipe excess oil from the blade before putting the unit back in ser-

vice.

Gear Box Assembly

Level 1.

Parts required: POWER BLENDX

14oz. or Lithium Based

Grease.

1. Clean dirt from the grease fitting (A).

2. Carefully pump grease into fitting (A). DO NOT force grease. Too

much pressure will force grease past seals and cause damage. Apply

1-2 pumps of grease every 15-25 hours of operation.

3. Wipe excess grease from around grease fitting.