Melinera Z30171-BS/Z31589-BS - Manual (Page 7)

7 GB/IE
Ensure that the product is installed by suitably experienced or
qualified persons only.
CAUTION! RISK OF OVERHEATING! Do not operate
the string lights inside the packaging.
After use, keep the string lights in the packaging to prevent
unwanted damage.
Do not pull the light chain cable and make sure it is laid down
properly so that no one walks or trips over it.
The product can be used on all surfaces officially classified as
being of “normal flammability“.
Do not attach any other objects to the product.
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage available is the same
as the required operating voltage for the device (230-240 V ~).
Before connecting the device to the mains you should always
check the string lights and the mains lead for any damage.
Never use the light set if you discover that it is damaged in any
way.
This light set‘s external flexible tube is non-replaceable. Hence
if it becomes damaged you must dispose of the entire light set.
The LED lamps are not replaceable.
Use the light set only with a mains adapter type
THDQ-D-P300036-BS. Failure to observe this advice will
invalidate any claims under the warranty.
Never open any of the electrical parts or insert any kind of
object into them.
Protect the mains cable from sharp edges, mechanical loads
and hot surfaces.
100822_mel_LED-Lichtervorhang_Content_BS_GB_IE.indd 7 20.05.14 15:21