Led light decoration, Proper use, Description of parts – Melinera Z31513-BS User Manual
Page 4: Technical data, Included items, Safety information

4 GB/IE/CY
LED Light Decoration
Q
Proper use
This product is suitable for use indoors and outdoors.
This product is intended for use in private, domestic
enviroment only and not for commercial purposes.
Q
Description of parts
1
Connection cap
2
Light chain
3
Hook
4
LEDs
5
Mains adapter
Q
Technical data
Light chain
2
:
Operating voltage:
3.5 V
, 250 mA
Bulbs:
80 x 3 V , 0.06W,
(bulbs are non-
replaceable)
Protection class:
Protection system:
IP44
Mains adapter
5
:
Nom. voltage, primary: 230 V ~, 50 Hz
Nom. voltage, secondary: 3.5 V , 1 W
Protection class:
IP class:
IP44
Mains adapter (Model No. TH-P035010).
Q
Included items
1 LED light chain
1 mains adapter
1 operating instructions
Safety information
Always keep children away from the
product.
This device is not a toy and should not be played
by children. Children are not able to understand
the dangers that can occur when handling this
device.
This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction con-
cerning use of the appliance in a safe way and
understand the hazards involved. Children shall
not play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
Ensure that the product is installed by suitably
experienced or qualified persons only.
CAUTION! RISK OF OVERHEATING! Do
not operate the light chain inside the packaging.
After use, keep the light chain in the packaging
to prevent unwanted damage.
Do not pull the light chain cable and make sure
it is laid down properly so that no one walks or
trips over it.
The product can be used on all surfaces officially
classified as being of normal flammability.
Do not attach any other objects to the product.
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage
available is the same as the required operating
voltage for the device (230 V ~).
Before connecting the device to the mains you
should always check the light chain and the
mains adapter for any damage.
Never use the light chain if you discover that it
is damaged in any way.
This light set‘s external flexible tube is non-
replaceable. Hence if it becomes damaged