Melinera Z30233A-BS/Z30233B-BS - Manual (Page 36)

38 GB/MT Melinera ®
Operation
Operation
Using the light set
CAUTION! The bulbs 6 may become loose during transport.
Before use, check that all the bulbs 6 are seated correctly in their
fittings 8 .
Note: When a bulb 6 is defective, the rest of the bulbs 6 will
not continue to illuminate. It is recommended that any defective
bulbs
6 are replaced immediately by new bulbs. To do this
check each bulb 6 in the series.
Place the LED light set 1 in the desired location
(e.g. Christmas tree).
Note: Ensure that the LED light set
1 is held in place by
means of the supplied attachment clips 5 only.
Insert the mains plug 4 into a suitable mains socket. The light
set is switched on.
Pull the mains plug 4 out of the mains socket to switch off the
product.
Changing bulbs
DANGER TO LIFE bY ELECTRIC SHOCK!
Always unplug the mains plug 4 from the socket before installa-
tion, dismantling, maintenance or cleaning.
CAUTION! RISK OF bURNS! Allow the string of lights 1
to cool down completely before changing the bulbs 6 .
66410_VDE_mel_LED-Lichterkette_Content_LB5.indd 38 12.05.11 13:45