Melinera Z30253-BS - Manual (Page 8)

8 GB/IE/CY
If the LED curtain lights 1 are not in use for any length of time (e.g.
holidays), disconnect them from the power supply.
After use, keep the LED curtain lights 1 in the packaging to prevent
unwanted damage.
Make sure the LED curtain lights 1 cable is not laid down in areas
where lawn mowers, trimmers, scissors or similar cutting tools are
used.
Do not pull the LED curtain lights 1 cable and make sure it is laid
down properly so that no one walks or trips over it.
If in any doubt about the safe installation or use of this product,
please consult a qualified electrician.
Use
Use the suction cups 4 to fix the curtain lights onto a window e.g.
Insert the plug on end of the supply line into the socket of the mains
adapter
3 .
Plug the mains adapter 3 into the socket.
Press the button on the control 2 to switch to the next lighting
effect.
NOTE: The LED curtain lights 1 has 8 different lighting effects.
When you turn on the LED curtain lights 1 , it always starts with the
lighting effect 1
Pull the mains adapter 3 out of the mains socket to switch off.
Cleaning and care
NOTE: All the bulbs are connected in series. A defective bulb can
lead to the failure to light of a string or 8 bulbs.