Melinera Z30174A-BS - Manual (Page 2)

GB/IE GB/IE GB/IE GB/IE
IAN 75575
Milomex Ltd.
c/o Milomex Services
Hilltop Cottage
Barton Road
Pulloxhill
Bedfordshire
MK45 5HP
UK
Model No.: Z30174A-BS / Z30174B-BS
Version: 07 / 2012
© by oRfgen Marketing
Last Information Update: 05 / 2012
Ident.-No.: Z30174A-BS / B-BS052012-6
Only a dry, lint-free cloth should be used for
cleaning.
Q Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful life
and not in the household waste. Infor-
mation on collection points and their
opening hours can be obtained from
your local authority.
EMC
Press the button on the control box 3 to switch
to the next lighting mode. When you reach
lighting mode 8, the next press of the button
switches the light chain
1 back into lighting
mode 1.
note: When you turn on the light chain 1 ,
it always starts with the last selected lighting
mode.
To switch the lights off, disconnect the mains
adapter
2 from the socket.
Q Cleaning and care
CAution! Risk of eLeCtRiC shoCk!
First remove the mains adapter 2 from the socket.
CAution! DAngeR of eLeCtRiC
shoCk! For reasons of electrical safety the device
must never be cleaned with water or other liquids
or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the device.
Sockets positioned outdoors for use with this
product should be of a type which is ade-
quately water proof for an outdoor location
and should be located at least 2.5m from the
nearest body of water or any locations where
water may collect.
If you have any questions about the product
or are unsure about any of its aspects, please
seek the advice of an electrical equipment
specialist.
Q use
note: The light chain 1 has eight different light-
ing modes.
note: The bulbs are connected in series. If one
bulb is defective, up to eight bulbs may not light up.
Insert the supply line plug into the socket of
the mains adapter
2 . Turn clockwise tighten
the union nut.
Plug the mains adapter 2 into the socket.
The lights are now switched on.
Never open any of the electrical parts or insert
any kind of object into them.
Protect the mains cable from sharp edges,
mechanical loads and hot surfaces.
Do not install with sharp fasteners or nails.
Always unplug the mains adapter 2 from
the socket before installation, dismantling or
cleaning.
Never touch the light chain 1 plug or the
light chain 1 itself with wet hands.
The light chain 1 must not be electrically
connected to another light chain.
If the light chain 1 is not in use for any length
of time (e.g. holidays), disconnect them from
the power supply.
This product is intended for use outdoors but
should be plugged into a socket which is lo-
cated in an indoor location (e.g. a shed, ga-
rage or porch).
The socket into which this product is plugged
must be protected by a residual current circuit
breaker (RCD) with a trip current not greater
than 30mA.