Installation, Connections & setup, Stand installation – Shivaki STV-24LEDGW9 User Manual
Page 8: Antenna connection

INSTALLATION
STAND INSTALLATION
(1) Keep the TV stand when installing.
(2) Don’t set the TV set on shelves, carpets, beds, or closets.
(3) Don’t cover the TV with curtain or paper.
(4) Avoid the following methods:
12
13
NOTE:
DVB-T radio in particular is very limited and not available in most locations.
Depending on your region and building structure, a stronger antenna may be
requires In order to receive DVB-T stations. Metal buildings and the geo-
graphic location of the transponder may have a strong effect on the reception.
Appropriate antennas may be obtained from your local speciality stores.
CONNECTIONS & SETUP
connecting all equipment.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
CONNECTIONS & SETUP
ANTENNA CONNECTION
shown below.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.