Shivaki SVC-1736R - Manual (Page 29)

PREPARATION 28
ENG
Remove the appliance from the packaging, checking that the product is whole and that all
the parts are there.
Insert the suction opening of the flexible hose (A) into the connector (10) (Fig. 1) (to
disconnect it, press the buttons (A5) and pull the tube Fig. 2).
Unwind the power supply cable (1) and insert the plug into a suitable power socket.
Open the battery compartment on hose handle (A4), and
insert 2xAAA (or R03P) batteries (supplied). Please follow
the (+) (-) mark inside the compartment for correct installation.
Press the ON/OFF switch (9 ). The ap-pliance will start to
operate. The ON/OFF switch (9 ) can be pressed with your
foot to avoid having to bend over.
You can adjust the suction power with the +/- buttons on
the hose handle. We suggest minimum suction level for curtains,
medium
- low for sofas, arm chairs and pillows, medium
-high for carpets and high for floors and hard surfaces (ceramic,
marble etc.).
Push the ON/STANDBY switch on the handle to standby or re-start
operation.
To end suction, press the ON/OFF Switch again.
Fig.1
Fig.2
Fig.3
Fig.4