Electrolux 12700 VI - Manual (Page 16)

Display
The display shows the following information:
• if the programme selector dial is on the RESET position, three flashing
dashes appear immediately after pressing the ON/OFF button to indicate
that the machine is ready to receive instructions for the required wash
programme;
• duration of the selected wash programme, calculated automatically
on the basis of the maximum recommended load for each type of fab-
ric.
• Selected drying time (max. 2 hours and 10 minutes for cotton, 1 hour
and 40 minutes for easy-cares).
• When the programme has finished, a flashing zero is displayed;
• delayed start, programmed using the special button (E).
• Incorrect option selection. If an option which is not compatible with
the set wash programme is selected, the message Err is displayed.
• Alarm code indicating a fault in the machine operation (see pages
38...41).
Programme progress display
By selecting the wash programme, the pilot lights cor-
responding to the various phases making up the pro-
gramme come on.
After the machine has started, only the running phase
pilot light stays on. When the programme has finished,
the END pilot light comes on.
16
Description of the appliance
DRAIN
RINSE
DRY
PREWASH
WASH
SPIN
END
RINSE HOLD
132998930.qxd 6/22/01 2:57 AM Pagina 16 (Nero/Process Black pellicola)