Florabest FGPA 1000 A1 - Manual (Page 7)

GB
- 7 -
an or by ISC after-sales service personnel.
•
Use only original spare parts.
•
The pump must never run dry or be used
when the intake line is fully closed. The
manufacturer’s warranty does not cover
damage caused to the pump as a result of
running it dry.
•
The pump must not be used to operate swim-
ming pools.
•
The pump must not be installed in the drinking
water pipeline.
•
The maximum temperature of the fluid must not
exceed +35°C.
•
Do not use this equipment to pump inflamma-
ble, gassing or explosive fluids.
•
The pumping of aggressive liquids (acid,
alkali, silo seepage, etc.) and liquids with
abrasive (emerizing) substances (sand) must
likewise be avoided.
3. Layout and items supplied
3.1 Layout (Fig. 1)
1. Garden pump
2. On/Off switch
3. Mounting holes
4. Water drain screw
5. Suction connector
6. Water fi ller screw
7. Pressure connector
8. Carry handle
9. Screw (2x)
10. Suction hose 4m
11. Connection adapter approx. 33.3 mm (R1)
male thread and approx. 42 mm (R1 1/4)
male thread
12. Sealing ring
13. Non-return valve and intake fi lter
3.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
damage in transit.
•
If possible, keep the packaging until the end
of the guarantee period.
Important
The equipment and packaging material
are not toys! Do not let children play with
plastic bags, plastic sheets and small
parts! There is a risk of choking and suf-
focating!
•
Garden pump
•
Carry handle
•
Screw (2x)
•
Suction hose 4m
•
Connection adapter approx. 33.3 mm (R1)
male thread and approx. 42 mm (R1 1/4)
male thread
•
Non-return valve and intake filter
•
Original operating instructions
4. Intended use
Range of applications
•
For irrigating and watering landscaped areas,
vegetable beds and gardens.
•
For operating lawn sprinklers.
•
With preliminary filter for drawing water from
ponds, streams, rainwater butts, rainwater
cisterns and wells.
Pumping media
For the pumping of clear water (freshwater), rain-
water and mild suds/ service water.
•
The maximum temperature of the fluid must not
exceed +35°C.
•
Do not use this equipment to pump inflamma-
ble, gassing or explosive fluids.
Anleitung_4180303.indb 7 Anleitung_4180303.indb 7 21.09.12 10:44 21.09.12 10:44