Maintenance instructions – Florabest FGPS 1100 B2 User Manual
Page 9
9
GB
• Check the proper status of the
electrical plug socket and make
sure that the plug socket is suf-
ficiently fused (at least 10 A). In-
sert the pump plug into the plug
socket and the pump is ready for
operation.
• Make sure that moisture or water
never come in contact with the
mains connection.
There is a risk of electrocution.
The appliance is not suitable for
direct connection to the drinking
water supply system.
Starting the unit
• Control the suction hose. The end of
the suction hose must be placed in wa-
ter.
• Control the pressure hose. The end of
the pressure hose must be in outlet po-
sition.
• Switch on the garden pump with the
ON / OFF switch
(
A
5).
Overload protection:
In the
event of overload the equipment
automatically switches off. To re-
start, allow the equipment to cool
then switch it back on.
Maintenance
Instructions
Clean and maintain your equipment regu-
larly. This will guarantee its performance
and long durability.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
Pull out the power plug before every
maintenance operation. There is a risk
of electrocution or of injury from mov-
ing parts.
Never direct the water jet
against the appliance, nor
clean the appliance under
flowing water. This could
give rise to the danger of
electric shock and damage
the appliance!
General cleaning instructions
A reduction in pump feed output may be
indicative of a blockage. In case the unit
clogs up, remove the suction and pressure
hoses. Flush water through the threaded
hole on the pump in order to remove the
foreign body.
Always keep the appliance clean. Do
not use any detergents or solvents.
• Keep clean the engine rips and motor
housing. Use a damp cloth or a brush.
•
Always keep the ventilation slots
clean and free.
•
Only clean the appliance with a soft
brush or a slightly moist cloth.
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our service
centre.
Storage
• Keep the equipment clean, dry and out
of the reach of children.
• With a rinse of water, remove fluff and
fibrous particles which are possibly
present in the pump casing