Florabest FKS 2200 B1 - Manual (Page 54)

54
GB
Chain.saw.safety.warnings:.
• Keep.all.parts.of.the.body.
away.from.the.saw.chain.when.
the.chain.saw.is.operating..Be-
fore.you.start.the.chain.saw,.
make.sure.the.saw.chain.is.not.
contacting.anything. A moment of
inattention white operating chain saws
may cause entanglement of your cloth-
ing or body with the saw chain.
• Always.hold.the.chain.saw.with.
your.right.hand.on.the.rear.
handle.and.your.left.hand.on.
the.front.handle. Holding the chain
saw with a reversed hand configura-
tion increases the risk of personal in-
jury and should never be done.
• Wear.safety.glasses.and.hear-
ing.protection..Further.protec-
tive.equipment.for.head,.hands,.
legs.and.feet.is.recommended.
Adequate protective clothing will re-
duce personal injury by flying debris
or accidentaI contact with the saw
chain.
• Do.not.operate.a.chain.saw.in.a.
tree. Operation of a chain saw white
up in a tree may result in personal in
jury.
• Always.keep.proper.footing.
and.operate.the.chain.saw.only.
when.standing.on.fixed,.secure.
and.level.surface. Slippery or un-
stable surfaces such as ladders may
cause a loss of balance or control of
the chain saw.
• When.cutting.a.branch.that.
is.under.tension.be.alert.for.
spring.back. When the tension in
the wood fibres is released the spring
loaded Iimb may strike the operator
and/or throw the chain saw out of
control.
• Disconnect.the.plug.from.the.
power.source.and/or.the.bat-
tery.pack.from.the.power.tool.
before.making.any.adjust-
ments,.changing.accessories,.or.
storing.power.tools. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
• Store.idle.power.tools.out.of.the.
reach.of.children.and.do.not.al-
low.persons.unfamiliar.with.the.
power.tool.or.these.instructions.
to.operate.the.power.tool. Power
tools are dangerous in the hands of
untrained users.
• Maintain.power.tools..Check.
for.misalignment.or.binding.
of.moving.parts,.breakage.of.
parts.and.any.other.condition.
that.may.affect.the.power.tool’s.
operation..If.damaged,.have.
the.power.tool.repaired.before.
use. Many accidents are caused by
poorly maintained power tools.
• Keep.cutting.tools.sharp.and.
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
• Use.the.power.tool,.accessories.
and.tool.bits.etc..in.accordance.
with.these.instructions,.taking.
into.account.the.working.condi-
tions.and.the.work.to.be.per-
formed..Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
Service.
• Have.your.power.tool.serviced.
by.a.qualified.repair.person.us-
ing.only.identical.replacement.
parts. This will ensure that the safety
of the power tool is maintained.