Change channel name sound settings, Settings, English – Energy Speaker Systems LTV46DA User Manual
Page 23: The unit can record and play back stereo sounds
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Weak Signal Boost
Programme Edit
Italy
12
PAL
BG
S23
217.25
S
23
Stereo / Dual 1
Off
Picture Audio Timer Install Setup Option
¥Move
OK: Select
MENU: Previous
EXIT: Exit
Sound
Stereo / Dual 1
Mono / Dual 1
Stereo / Dual 2
Mono / Dual 12
Auto Tuning
Programme
Colour
System
Manual Tuning
Fine Tuning
Name
Sound
Weak Signal Boost
Programme Edit
Italy
12
PAL
BG
S23
217.25
S23
Stereo / Dual 1
Off
¥
Picture Audio Timer Install Setup Option
Name
¥Move
0~9 Adjust
OK: Clear
MENU: Previous
EXIT: Exit
Name
S
2 3
English
21
Settings
The names of the channels are programmed into the receiver. You can change these names manually.
1 Press . To return to the main menu, press
several times.
2 Press ¥ or and select INSTALL.
3 Press or and select PROGRAMME.
4 Press ¥ or and select the desired channel.
5 Press or and select NAME.
6 Press .
7 Press or to select the desired letter.
8 Press ¥ or to move to the next letter.
9 Press to save the settings.
The unit can record and play back stereo sounds.
1 Press . To return to the main menu, press
several times.
2 Press ¥ or and select INSTALL.
Press or and select SOUND.
3 Press .
4 Press or to select the desired setting.
5 Press to save the settings.
The following settings are available:
Stereo/Dual 1: National language stereo
Mono/Dual 1: National language mono
Stereo/Dual 2: Foreign language of the program
Stereo/Dual 12: Both languages at the same time
Change Channel Name
Sound Settings
This setting is only available if the tuner is receiving a signal from the roof
aerial or the cable. If you have connected an external device, set the language
on this device.
¥
1027_A50-095300_Eng 10/27/06 9:44 PM Page 21