Emerson Radio NR101TT - Manual (Page 10)

9
OPERATING INSTRUCTIONS
Listening To The Radio
1.) To turn the system ‘On’, rotate the OFF-VOLUME control clockwise until a
‘click’ is heard, and set the Volume to a low level.
2.) Set the function selector (AM/FM/PHONO) to the AM or FM band as desired.
The dial scale light comes ‘On’.
3.) Rotate the TUNING control to tune to the desired radio station. If you tune to a
strong FM Stereo station the FM ST. indicator will light and reception will be in
stereo. If you tune to a weaker FM station, the reception will automatically
switch to mono.
4.) Adjust the OFF-VOLUME control to the desired level.
5.) When you are finished listening turn the OFF-VOLUME control counter
clockwise until a ‘click’ is heard. The tuning dial light go ‘Off’.
Antenna Information
The AM bar antenna is inside the cabinet. If AM reception is unsatisfactory try
repositioning the cabinet slightly until the internal antenna is picking up the strongest
signal.
The FM antenna is built in the AC power cord. If necessary adjust the position and
direction of the AC power cord until you find the position that provides the best
reception.
V O L UM E
NR101TT_072507.p65 25/7/2007, 10:18 9