Crivit DS-URBAN101 - Manual (Page 5)

7 8
Product Characteristics
ECE-R 22.05 Homologation
This helmet is in compliance with ECE-R 22.05 standards and is homologised
accordingly. The ECE-R 22.05 standard consists of uniform conditions for the
approval of protective helmets and its visors for drivers and passengers of mo-
torcycles and mopeds. The basic principles for these tests are the so called ECE-
Regulations of the Economic Commission for Europe.
Significant Tests of the ECE-Regulation 22.05
- Shock absorbance
- Dynamic test of wear features
- Field of vision test
- Design strength
- Sustainability test (Strip-off test)
- Chin straps and lock test
- Shear test for outside edges
- Friction performance test of the outer shell
- Visor test (mechanical and visual characteristics)
- Chin bar, chin part damping test
TÜV certified wearing comfort
The TÜV Rhineland evaluates performance and comfort of helmets by means of
test subjects. Only helmets that meet these stringent requirements are award-
ed the desired logo. Aspects such as aerodynamics, acoustics, ventilation, com-
fort and fit are rated.
Toxproof
The Toxproof-sign of the Technical Inspection Authority (TÜV) Rhineland
identifies products that have been tested for toxic substances where no
health hazards can be expected according to the perception of today.
Inside Padding with Coolmax® Inserts
Coolmax® by INVISTA is a high-performance fabric fibre that supports
its wearers during sport activities. Based on the patented DuPont-fibre
technology, Coolmax® transports moisture from the body to the fabric surface where it dries
quicker than with any other fabric.
The specially developed fibres of INVISTA that are used for Coolmax®-fabrics transport the
moisture away from the body to the surface of the fabric where it has the opportunity to
evaporate quickly. At the same time the uniquely formed fibres offer maximum breathing
activity, even in wet conditions. In addition the breathing activity improves the heat
regulating effect.
Cheeks, forehead and neck pads of this article are equipped with Coolmax®.
Pure by HeiQ®
The inside padding is made with newly developed Pure Technology.
Pure is an anti-bacterial odour inhibitor featuring silver microcomposite par-
ticles for sports and recreational garments developed and manufactured by
the Swiss High-Tech company HeiQ®.
The micro fibres of the helmet lining are made with an innovative, anti-
bacterial effective silver-technology. The anti-bacterial effect of silver has
already been well-established for centuries. HeiQ® has further fortified these
characteristics to effectively and permanently prevent an odour formation.
Anti Scratch
To reduce the risk of scratching, the built-in visor and the replacement visor
feature a special coating. This coating prevents rapid scratching of the exter-
nal part of the visor.
Construction for those who wear glasses
The helmet is also suitable for those who wear glasses. An extra soft padding improves the
wearing comfort for those who wear glasses.
HCM Technology
High Density Copolymer Matrix: High quality ABS plastic is formed under
extreme heat and pressure to make a robust and impact-resistant outer
shell.