Projector mounts, Acmp 100, Fcmp series – Extron electronic PCM 240 User Manual
Page 2: Angled ceiling mounting plate, Flat ceiling mounting plates, Continued)
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Dubai
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
Projector Mounts
(continued)
P r o j e c t o r M o u n t s
ACMP 100
Angled Ceiling Mounting Plate
descriPtion
The
ACMP 100 Angled Ceiling Mounting Plate is used to attach Extron PMP Projector Mounting
Poles to angled ceilings. The mounting plate provides a full 100 degrees of adjustment from
-5 to +95 degrees enabling the PMP 2, 4, 6, 10 or 12 pole with an Extron UPB 25 Universal
Projector Mount to hang level. A safety set screw secures the PMP inside the ACMP 100.
Positioning slots with locking bolts allow exact angling of the Projector Mounting Pole on the
ceiling during installation. Available in black.
Model
Version descriPtion
PArt #
ACMP 100
Angled Ceiling Mounting Plate, Black
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70-503-02
FCMP Series
Flat Ceiling Mounting Plates
descriPtion
The
FCMP Series Flat Ceiling Mounting Plates are used to attach Extron PMP Projector
Mounting Poles to level ceilings. The mounting plates measure 4 inches (10.2 cm) or 10 inches
(25.4 cm) square and have a low profile for tight mounting to enable the PMP 6" projector
mount pole with an Extron UPB 25 Universal Projector Mount to be placed very close to the
ceiling. A safety set screw secures the PMP inside the FCMP Series plate. Available in black.
FCMP 1010
FCMP 44
Model
Version descriPtion
PArt #
FCMP 44
4"x4" Ceiling Mounting Plate, Black
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70-504-02
FCMP 1010
10"x10" Ceiling Mounting Plate, Black
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70-585-02
811