Kichler 337016 - Manual (Page 11)

10
Fig. 20
Glass shade
Lamps
Light fixture/switch
housing assembly
Metal nut
Decorative glass cap
Decorative nut
12. INSTALLING THE LAMPS AND
GLASS SHADE
Step 1. Install 2, 13 Watt, E27 compact
fluorescent lamps (included). (Fig. 20)
Step 2. Remove the decorative nut, glass cap
and metal nut from the light fixture stem. Place
the glass shade over the light fixture stem and
secure the shade with a metal nut (rubber side
touching the shade). (Fig. 20)
Step 3. Fit the decorative glass cap onto the
light fixture stem, while holding the decorative
glass cap, thread the decorative nut onto the
light fixture stem securely. DO NOT OVER
TIGHTEN.
NOTE: Make sure to leave enough space
between the fan pull chain and the fluorescent
lamp so the chain doesn't rub against any of
the lamp.
52” Canfield TM Pro