Euro-Pro EP031 - Manual (Page 2)

OPERATING INSTRUCTIONS
6. Dust Cup Filter
7. Upholstery Brush
8. Crevice Tool
9. Flexible Hose
GETTING TO KNOW YOUR HAND VACUUM
3. To use the flexible hose, push
the end of the hose into the
suction hole, then attach the
desired accessory to the other
end of the flexible hose, as
shown below.
How To Operate Your
Hand Vacuum
1. Hold the hand vacuum firmly in
your hand by the Handle.
2. Push the On/Off Power Button to
“On” position.
3. Start vacuuming.
CAUTION: The Hand Vacuum is a
very powerful unit. Make sure that you
hold it firmly, otherwise it can slip out of
your hand and cause injury.
2. To attach the crevice tool or
upholstery brush to the Hand
Vacuum, push desired accessory
into the suction hole, as shown
below.
Warning: Always unplug from
electrical outlet before opening the dust
cup (container).
Note : Dust cup filter must be used
when operating the hand vacuum.
Assembling the Hand Vacuum
1. To open the dust cup (container), push
the dust cup release button and pull
out the dust cup. Verify that the dust
cup filter is inside, then attach the dust
cup (container) to the hand vacuum.
1. Suction Hole
2. Dust Cup Release Button
3. On/Off Power Switch
4. Handle
5. Dust Cup (Container)
Technical Specifications
Voltage: 120V~ 60Hz.
Power: 3.2 Amps, 400 Watts
2 3