Chapter 5. monitor information – EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge User Manual
Page 20

Version 1.02
36
4.4.2 Administration
Step 1 Click Utility, Administration. The following figure shows the
Utility – Administration page.
9 Supervisor Account. Change the supervisor’s user name
& password in the Supervisor Account field, and Click
FINISH to take effect on the previous configuration
changes.
9 Apply the New Settings. Click Utility, Administration,
select the Save then Restart to apply the new
configuration settings.
Step 2 Click FINISH to take effect on the previous configuration changes.
Hint: It takes about 10 seconds, to complete the restart process.
Version 1.02
37
Chapter 5. Monitor Information
User can find the system running status and other information on this
window. Click the Running Status link on the left window, use can choose
which function that he wants to monitor.
General System Information
The following information can be found in this block.
9 Product
Model
9 Host
Name
9 Software
Version
9 Build (Built by)
9 Boot Code Version
9 Web
Version
9 System
Uptime
General System Status
The following information can be found in this block.
9 Operation
Mode
9 Bridge IP Address
9 Bridge
Subnet
9 Wireless
SSID
Services Information
This block shows whether the following services are enabled or disabled.
9 NAPT
9 SNMP
9 MAC
Filter
9 WEP
encryption.