Escort 7500S - Manual (Page 7)

EZ-Programming Overview of EZ-Programming
10 11
There are 10 user-selectable options so you
can customize your Passport 7500S for your
own preferences. The buttons labeled CITY
and DIM are also used to enter the Program
Mode, REVIEW your current program
settings, and to CHANGE any settings as
desired. The words PROGRAM, REVIEW,
and CHANGE are located on the top of the
detector, and are highlighted in dark blue
graphics. Pages 12-14 explain each option in
more detail.
How to use EZ-Programming
1 To enter Program Mode, press and
hold both top buttons down for 2
seconds. (The unit will beep twice, and
will display the word “Program”).
2 Then press the REVIEW button to
review the current settings. (You can
either tap the button to change from item to
item, or hold the button to scroll through
the items).
3 Press the CHANGE button to
change any setting. (You can either tap
the button to change from setting to setting,
or hold the button to scroll through all the
options).
4 To leave the Program Mode, simply
wait 8 seconds without pressing any
button. (The unit will display Complete,
beep 4 times, and return to normal opera-
tion).
*
Factory Default Settings
To reset Passport to its original factory settings, press and hold the “CITY,” “DIM,” and “MUTE” buttons while
turning the power on. Passport’s display will provide a “Reset” message, accompanied by an audible alert,
acknowledging the reset.
An example
For example, here is how you would turn
Passport’s AutoMute feature off.
1 Enter the Program Mode by holding
both the city and dim buttons down for
2 seconds. Passport will beep twice and
display Program.
2 Then hold the REVIEW button down.
Passport will scroll through the categories,
starting with Pilot Light ( Pilot ), then
Power-on sequence ( PwrOn ), then Signal
strength meter ( Meter ), and then
AutoMute (aMute ).
3 Release the REVIEW button when
Passport shows the AutoMute item. Since
the factory setting is for AutoMute to be
on, Passport will display aMute ON .
(If you accidentally don't release the
Review button in time, and Passport goes
to the next category, hold the Review
button down again, and after Passport
scrolls through all categories, it will begin
again at the top of the list.)
4 Press the CHANGE button to change
from aMute ON to aMute OFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any button.
Passport will display Complete, beep 4
times, and return to normal operation.
Pilot HWY
Pilot H
Pilot H.>
Pilot +
Pilot +.>
Pilot +>
PwrOn STD
PwrOn FST
Meter STD
Meter EXP
aMute ON
aMute OFF
Tone STD
Tone LOUD
City STD
City LoX
City NoX
Brt LAST
Brt MIN
Brt MED
Brt MAX
Brt DARK
DARK STD
DARK ALL
SWS Off
SWS On
VG2 Off
VG2 On
Press the CHANGE button
to change your setting
within a category
* Full word: Highway or Auto or City
Letter: H or A or C
Letter, with scanning dot
Symbol: + or • or --
Letter, with scanning dot
Scanning symbol
* Standard power-on sequence
Fast power-on sequence
* Standard signal strength meter
Expert Meter
* AutoMute on
AutoMute off
* Standard tones
Loud tones
* Standard City mode sensitivity
Low X band sensitivity in City Mode
No X band sensitivity in City Mode
*
Last brightness used
Minimum brightness when turned on
Medium brightness when turned on
Maximum brightness when turned on
Dark Mode when Passport turned on
* Standard Dark: shows HD, AD, CD
All Dark, no display
* SWS detection off
SWS detection on
*
VG2 detection off
VG2 detection on
Press the REVIEW button
to go from one category
to the next
PILOT LIGHT
(Power-on indication)
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
AUDIO TONES
CITY MODE SENSITIVITY
BRIGHTNESS
DARK MODE
Safety Warning System
VG2 (radar detector detector)