Electrolux LAVATHERM 37700 - Manual (Page 27)

Something not working?
27
If you do not find the required information in this manual to remedy a
disturbance, please call the customer service.
The drying process takes
unusually long
Spent air removal
disturbed
Make sure that there are
no kinks in the spent air
hose and/or clean the
spent air removal ducts
Fluff filter is clogged Clean the fluff filter
The door cannot be closed
Fluff filter has not been
inserted correctly and/or
the filter lid not closed Replace the fluff filter
and ensure the filter lid is
closed
The door cannot be opened
with the DOOR button
Electric mains plug not
connected
Connect the mains plug
Program selector set to
OFF
Set a program. The fill-in
door can be opened at
any time by pressing
firmly against the door
(pressing location )
The dryer terminates the
drying process automatically:
END is displayed shortly after
program start; no display of
the extent of drying
Too dry or too little
laundry filled-in for the
selected program
Select time program or
higher drying stage (e.g.
EXTRA DRY instead of
CUPBOARD DRY)
The drying process takes
unusually long. 4.5 hours
after the beginning of the
drying process:
- END display flashes
- acoustic signal sounds
- discontinuation of the
drying process
- error code C6 is displayed
SPECIAL CARE button
pressed and too much
laundry filled-in
Check the program
selection: SPECIAL CARE
button appropriate only
for laundry amounts up
to 2.5kg
Too much laundry
filled-in Reduce the amount of
laundry filled-in
Laundry too damp
Pre-dry the laundry more
thoroughly
Symptom Possible cause Solution