Getting started – GoPro Karma User Manual
Page 4
6
7
CHARGING THE KARMA BATTERY AND CONTROLLER
1. Remove the battery from Karma.
2. Connect the components to the charger.
3. Connect the charger to a wall outlet. The battery status lights on the
battery and the controller indicate the charge level.
GETTING STARTED
NOTICE: Using a battery charger other than the Karma charger can
damage the Karma battery. For the controller, use only chargers marked:
Output 0.5V 0.5-3A. If you do not know the voltage and current of your
charger, use the Karma charger.
For more battery information, see
CHECKING THE BATTERY LEVEL
Press the Battery Status button.
As the controller’s battery is used, one battery status light blinks, then turns
off. This pattern continues until all lights are off, indicating that the battery
is fully drained.
When Karma is in flight, the battery status is indicated at the top of the
touch display. However, Karma returns to the launch location if the battery
becomes too low. For more information, see
GETTING STARTED