Emerson EWC1301 - Manual (Page 8)

- 8 - EN
9I03
- REAR VIEW - [Fig.3]
26
ANT.
27
7 F.FWD button– Press to rapidly advance the tape,
or to view the picture rapidly in forward during
playback mode. (Forward Search)
B
button–
• When setting program (for example: setting clock
or timer program), press to determine your selec-
tion and proceed to the next step you want to
input.
• Press to determine setting modes from on screen
menu.
• Press to select a mode from a particular menu.
(for example: LANGUAGE or USER’S SET UP)
8 REC button– Press for manual recording.
OTR button– Activates One Touch Recording.
(only on the TV/VCR)
9 RECORD indicator– Flashes during recording.
Lights up in the Stand-by mode for Timer
Recording.
10 Remote Sensor Window– Receives the infrared
signals from the remote control.
11 CHANNEL K / L buttons– Press to select the
desired channels for viewing or recording.
You may display the main menu on the TV screen
by pressing repeatedly this button on the
TV/VCR.
TRACKING function– Press to minimize video
‘noise’ (lines or dots on screen) during playback
mode. (See page 19.)
12 VOLUME X X / Y Y buttons– Adjust the volume
level.
13 POWER button– Press to turn TV/VCR on and
off. Press to activate timer recording.
14 Cassette compartment
15 Number buttons– Press to select desired channels
for viewing or recording. To select channels from
1 to 9, first press the 0 button and then 1 to 9.
+100 button– When selecting cable channels
which are higher than 99, press this button first,
then press the last two digits. (To select channel
125, first press the “+100” button then press “2”
and “5”.)
16 MENU button– Press to display the main menu on
the TV screen.
17 DISPLAY button– Display the counter or the cur-
rent channel number and current time on the TV
screen. (See page 25.)
18 SPEED button– Press to choose the desired
recording speed:SP/SLP.
19 T-PROG. CLEAR button– Press to cancel a setting
of timer program. (See page 23.)
COUNTER RESET button– Press to reset counter
to 0:00:00.
20 GAME button– Sets the game mode and external
input mode at the same time. (See page 14.)
21 TIME SEARCH button– Press to activate Time
Search mode.
22 PAUSE/STILL button– Press to temporarily stop
the tape during the recording or to view a still pic-
ture during playback.
23 MUTE button– Mutes the sound. Press it again to
resume sound.
24 CHANNEL RETURN button– Press to go back to
the previously viewed channel. For example,
pressing this button once will change channel dis-
play from 3 (present channel) to 10 (previously
viewed channel), and pressing it a second time
will return from 10 to 3.
25 WAKE-UP/SLEEP button– Sets the Wake up or
Sleep Timer. (See page 23 and 24.)
26 Power cord– Connect to a standard AC outlet
(120V/60Hz).
27 ANT. terminal– Connect to an antenna or cable
system.
T5209/7209 01.2.14 6:35 PM Page 8