Elkay EWMA7220SACMC - Manual

Model A B C D E F G H I J K
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
EWMA7220 72 1829 20 508 69 1753 16 1 / 2 419 36 914 1 1 / 2 38 10 254 2 51 24 610 12 305 8 203
7-3/4"
(197mm)
7/16" (11mm) x
3/4" (19mm)
LONG SLOT
STAINLESS
STEEL BRACKETS
6-3/8"
(162mm)
1-1/2" (38mm) O.D.
33-1/2"
(851mm)
J I
8-7/8"
(225mm)
3-1/4" (83mm) DIA. FOR LK18B DRAIN
1/4" R
(6mm)
F F
H
A
C
E
D B
E
G
K
3-1/2"
(89mm)
9-1/8"
(232mm)
1/4" R (6mm)
5-3/8"
(137mm)
36" (914mm)
SUGGESTED
FLOOR TO
RIM HEIGHT
H
I J
33-1/2"
(851mm)
13-3/4"
(349mm)
7-3/4"
(197mm)
F
4-1/4"
(108mm)
G
K
H
H
14"
(356mm)
1-1/4" (32mm) DIA.
(3 HOLES)
WALL
HANGER
7/16" (11mm)
DIA. HOLE
Three Station Wall Mounted Wash Sink
With Sensor Faucets, AC Powered
Models EWMA7220SACC,
EWMA7220SACMC and EWMA7220SACTMC ®
SPECIFICATIONS
GENERAL
EWMA7220 #14 gauge, type 304 (18-8) stainless steel three
station wash sink with 1/4" (6mm) radius coved corners. 1-1/2"
(38mm) wide sloping top channel rims, with 2" (51mm) flat
apron. Full length 10" (254mm) high backsplash. Rim corners
are square. Exposed surfaces are hand blended to a uniform
satin luster finish. Furnished with wall hangers and stainless
steel support brackets.
(CHECK MODEL SPECIFIED) MIXING
MODEL FAUCET DRAIN VALVE
EWMA7220SACC LK722AC (3) LK18B NONE
EWMA7220SACMC LK722AC (3) LK18B LK724 (3)
EWMA7220SACTMC LK722AC (3) LK18B LK723 (3)
LK722AC Sensor-operated, non-mixing (tempered water),
backsplash-mounted gooseneck faucet with adjustable sensor
eyes. A continuous beam is emitted from sensor. The sensor
faucet is activated by user placing hands under the spout.
Tempered water will flow as long as hands remain within sen-
sor range. When hands are removed, the water stops automat-
ically based on shut off delay settings. The sensor then resets
and is ready for the next user. AC powered, chrome plated -
solid brass body construction and 12-3/4" (324mm) high (bot-
tom of base to top of spout), 8-3/4" (222mm) from aerator to
base, 5-3/8" (137mm) reach C.P. spout with 2.0 gpm laminar
flow control on spout end. Includes vandal-resistant, water-
resistant sensor control module with armored vandal-resistant
control and power cables. LK730 wire lead allows contractor to
connect each control box to one LK727 multi-unit power
adapter. Depending on the location of the LK727, 20-22 gauge
wire (not supplied) may be required from LK730 to LK727.
Slow-closing piston operated solenoid valve, in-line filter with
clean out trap, and 3/8" (10mm) copper fittings for supply tube
Elkay Manufacturing Company 2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2001 Elkay Mfg. Co.
(3/01) 3-45
www.elkay.com
Model EWMA7220SACC
DIMENSIONS
furnished by contractor. Control circuit is solid state, has
adjustable sensor range (6" [152mm] preset to 30" [762mm]),
shut off delay preset at 1 second and field adjustable to 2, 4 or
8 seconds, and automatic time-out feature (to prevent sink
overflow) is preset at 0 seconds and is field adjustable to 15, 30
or 60 seconds.
LK18B Stainless steel perforated grid strainer with 1-1/2"
(38mm) O.D. stainless steel tailpiece.
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.