Emerson Radio MS7622 - Manual (Page 16)

15
PROGRAMMED PLAYBACK
This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You cannot program tracks while a disc is playing. If the disc is playing
press the STOP button first before beginning the programming steps below:
1.) Press the PROGRAM button to enter the
Program Mode. The PROGRAM indicator
and Program Number ‘0’ flash.
2.) Press the SKIP or buttons to select
the first track number you wish to enter in
the program memory.
Example: Track Number 8.
3.) When the desired track number appears on
the display, press the PROGRAM button
again to enter that track in memory. The
Program Number display returns to “0”.
4.) Repeat Steps 2-3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
Note: You may program the same track
number to play multiple times in the
program sequence if desired. When
programmed track is full, “– –” flashes in
the display.
5.) Press the PLAY/PAUSE button to begin
Programmed Playback. The PROGRAM
indicator flashes. Playback will begin with the
first track you programmed and will continue
until the last programmed track has played.
MS7622_031504.p65 15/3/2004, 11:54 15