Emerson EWL15D6 - Manual (Page 24)

– 24 – EN
You may determine the order in which tracks will play.
1
In stop mode, press [MODE].
• The “PROGRAM” screen will appear.
2
Press [
▲ ] or [▼] to select a track, then press
[ENTER].
• Press [CLEAR] to erase the most recently
entered track.
• If the entire Program cannot be displayed at
once on a screen, “ G” appears to go to the next
page and “ H” appears to go back to the previ-
ous page.
3
Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Press [PLAY O] to play the programmed tracks.
• While the program is being played back,
pressing [STOP C] works as follows.
• Press [STOP C] once and then [PLAY O]
again, playback will restart from the point
where [STOP C] was pressed. (Program con-
tinued)
• Press [STOP C] twice and then [PLAY O]
again, playback will restart from the track in
the usual way. (Program canceled)
• Up to 99 tracks can be entered.
• To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
• If you like to repeat the current track in the
program, press [REPEAT] several times until
“
TRACK” appears during playback. If you
like to repeat the entire program press
[REPEAT] several times until “
ALL”
appears during playback.
This function shuffles the playing order of tracks
instead of playback in the sequence.
1
In stop mode, press [MODE] twice.
• “RANDOM” screen appears.
2
Press [PLAY O] to start random playback.
• If you like to repeat the current track in the ran-
dom selection, press [REPEAT] several times
until “
TRACK” appears during playback. If
you like to repeat the entire random selection
press [REPEAT] several times until “
ALL”
appears during playback.
PROGRAM
MODE
ENTER
TOTAL
1/4 2/3
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
1:03:30
PLAY
NOTE
RANDOM PLAYBACK
twice MODE
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
PLAY
NOTE