Ericsson F221m - Manual (Page 43)

4) Click on ‘Finish’.
5) In the ‘Dial-Up Networking’ folder, right-click on
the created connection and select ‘Properties’.
6) In the ‘General’ tab, turn off ‘Use area code and
Dialing Properties’.
7) In the ‘Server Types’ tab:
– ‘Type of Dial-Up Server’: select ‘PPP: Internet,
Windows NT, Windows 98’ from the list.
– Check that ‘Advanced options’ and ‘Allowed
network protocols’ are filled in as shown below:
42 Annex: PC data configurations