Emerson SB315 - Manual (Page 17)

TV OPERATION
16
Adjust the volume level by pressing the VOLUME UP
(
) 1/DOWN ( ) 2 buttons.
1 2
1 1
3
For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 14.
Press and release the CHANNEL UP (
) 1/DOWN ( ) 2
buttons. The TV automatically stops at the next channel set
into memory. This will not operate if channels are not set
into memory.
Direct Program Selection buttons (0-9)
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• For Channels 1 through 9, press 1-9
3 as desired.
• For Channels 10 through 99, press the -- button 4 once,
then the two digits in order.
• For Channels 100 through 125, press the -- button 4
twice, then the three digits in order.
1
2
3
4
3
4
4
Set the AIR/CATV Menu Option as described on page 12.
Select
Set-Up
Language : English
Skip: Off
Channel : 2
Reception
Memorize Channels Air
Adjust Exit
2
Press the Power button to turn on the
TV.
2
3
4
1
OPTIONS
AIR: If using a VHF/UHF
antenna.
CATV: If using Cable TV.
NOTES:
• When AIR/CATV option is set to AIR, only channels up
to 69 can be selected. When set to CATV, channels
up to 125 can be selected.
• If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
AIR/CATV option must be set to CATV when using cable, see page 12.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.