Powerplus POWXG8035LI TELESCOPIC HEDGE TRIMMER 18V LI-ION ONE FITS EN - Manual (Page 8)

POWXG8035LI EN
Copyright © 2014 VARO P a g e | 8 www.varo.com
10 CLEANING AND MAINTENANCE
Warning! Before performing any work on the equipment, always remove the
battery.
 Check your machine regularly before starting the work.
 Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
 After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
 Always keep the ventilation slots in motor housing clean
 Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine ,Finally, dry the motor housing carefully.
 Store the machine with the supplied protection cover(15)
 Only use original accessories and spare parts.
11 TECHNICAL DATA
Type POWXG8035LI
Battery voltage / capacity 18 VDC / 1500mAh
Battery type Li-ion
Cutting capacity 18 mm
Blade length 470 mm
No load speed 2400min-1
Charger :
Input Voltage ~Frequency 230-240VAC, 50-60 Hz, 45W
OUTput voltage / current 19,5 VDC, max. 2,2 A
Battery charger
Type 1 hour fast charger
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
75 dB (A)
Acoustic power level LwA 88 dB (A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) 1,2 m/s2 K = 1,5 m/s²