Operation, Cutting depth adjustment, Starting and stopping – Powerplus POWXG7512 LAWN SCARIFIER / AERATOR 1300W EN User Manual
Page 8: Starting, Stopping, Powxg7512, 8 operation

POWXG7512
EN
Copyright © 2015 VARO
P a g e
| 8
www.varo.com
8 OPERATION
8.1
Cutting depth adjustment
WARNING! Always switch the product off and pull the mains plug from
power supply before any adjustment.
Adjust the depth according to the needs of your lawn. The most suitable depth depends on
the kind of lawn and the actual height of the grass.
Push the depth adjustment lever (8) towards the wheel, then move it forward or backward
to adjust the cutting depth. (See Fig. 8a).
Adjust the lever (8) to one out of the five stages. Read the adjusted depth from the scale.
(See Fig. 8b and table)
Scale/
position
Setting
Application
Depth
Scarifying
Depth
Raking
1
Transport
-10 mm
for transportation
and storage
-10 mm
for transportation
and storage
2
Minimal
+5 mm
scarifying a young
or sensitive lawn,
removing thin
thatch layers, also
use this setting
when scarifying a
second time in the
Autumn
+10 mm
raking a young or
sensitive lawn,
removing thin
thatch layers
3
Middle
0 mm
scarifying healthy
lawn, removing
thatch
+5 mm
raking healthy
lawn
4
Deep
-5 mm
scarifying healthy
lawn, removing
thicker thatch
0 mm
raking an
unkempt lawn
5
Maximal
-10 mm
scarifying an
unkempt lawn,
removing thick
thatch layers
-5 mm
do not use for
raking
8.2
Starting and stopping
8.2.1
Starting
The product is fitted with a lock-off button feature. To start the product, simply depress the
lock-off button (2) then fully press and hold the start/stop lever (1). The lock-off button can now
be released. (See Fig. 9)
NOTE: It is not necessary to maintain pressure on the lockoff button once
the start/stop lever is squeezed and the motor is running. The lock-off
button is a safety device to avoid accidental start-up of the device.
8.2.2
Stopping
The product will automatically stop once the start/stop level is released. The lock-off button will
have to be depressed and the start/stop lever squeezed to restart the product motor.