Powerplus POWXG6460 SHREDDER 2600W SIL ENT EN - Manual (Page 13)

POWXG6460 EN
Copyright © 2014 VARO P a g e | 13 www.varo.com
Check all the material you want to shred carefully. Make sure it doesn’t contain any stones or
nails as this might severely damage the shredder.
Be aware of vibrations. Heavy vibrations are caused by damaged or worn out blades. Store
the shredder indoors in a dry place.
8.9.2 Mulching palm fronds
The shredder is designed to effectively handle palm fronds, reducing them to an easily
disposable waste.
If the head of the palm fond is particularly large or hard it may have to be removed before it is
inserted into the shredder.
If the material is particularly fibrous or hard then you may have to loosen the blade adjustment
knob as outlined
in section ‘Adjusting the cutting gear’ and run the material through once to
soften it. Then retighten the adjustment screw and insert the material a second time to
effectively shred it.
8.9.3 Composting
The processed material can be composted in various ways:
 The material can be placed in a heap directly on the ground (cold composting).
 The material can be placed in a plastic container, wooden crate, skeleton container or
similar (cold composting).
 The material can be placed in an insulated compost holder. The heat is then held for
longer and the rotting process also continues during the winter. This method produces
faster results (warm composting).
 The material can be spread directly onto the garden (surface composting).
9 TECHNICAL DATA
Rated Voltage 230V
Rated frequency 50Hz
Rated Power 2600W
Rotation speed 40min
-1
Max. diameter 40mm
Protection class Class I
Int. protection degrees IPX4
Weight 28kg
Collect box 60L
Note
:
1. The S6-40% indicates a load profile of 4 min load and 6 min idle time. For practical
application, continuous operation is permitted.
2. The Max Cutting Diameter depends on the hardness of the wood.
10 NOISE
Noise emission values measured according to relevant standard. (K=2.5)
Acoustic pressure level LpA 80 dB(A)
Acoustic power level LwA 91 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).