Powerplus POWXG6026 LAWN MOWER 190CC 502MM EN - Manual (Page 7)

POWXG6026 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
8 ASSEMBLY
8.1 Attaching the grass box (Fig 1)
 Put the metal frame in the grass box. (A)
 Fix the grass box to the metal frame. (A)
 Fold the deflector plate upwards, and insert the grass box. (B)
8.2 Attaching the handles (Fig 2)
Unfold the handles, and screw together the parts of the handle with the two screws and nuts.
8.3 Adjusting the cutting height (5)
Before adjusting the cutting height, switch off the engine. Let the cutting blade come to a
complete standstill before making any adjustment of the cutting height. Adjustment can be
done either to the "+" or to the "-" direction. Adjustment takes place in steps. Make sure that
the adjustment lever securely snaps in at the desired height position.
9 OPERATION
9.1 Read the engine manual before using the lawn mower.
The lawn mower is delivered without engine oil: Add 0.6 litres of engine oil, before starting the
engine.
9.2 Starting the engine
After proper assembly of the lawn mower, start the engine as follows:
 Put the lever on START or
.
 Pull the engine control lever (3) towards the handle. Pull the recoil starter, until resistance
is felt, and then pull it firmly.
 When the engine runs, put the throttle (2) to the "RUN" position.
The blade starts to rotate after start-up of the engine. Keep the engine
control lever (3) in working position during operation of the lawn mower.
The engine will stop as soon as you release the engine control lever.
9.3 Self-propelling function
To activate the self-propelling function press the self-propelling lever (1) towards the handle.
WARNING: The lawn mower immediately starts moving. To stop the
movement, release the self propelling lever (1). The lawn mower will then
stop immediately.
9.4 Protective cover of the driving belt (Fig 3)
Do not try to open the protecting cover of the driving belt.
If the protecting cover of the driving belt is damaged, it must be replaced by the manufacturer,
your dealer or a person with a similar qualification.