Powerplus POWXG2032 GRASS/HEDGE SHEAR 7.2V LI-ION EN - Manual (Page 5)

POWXG2032 EN
Copyright © 2014 VARO S i d e | 5 www.varo.com
 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
 Keep handles dry, clean and free from oil and grease. Slippery handles do not allow for
safe handling and control of the tool in unexpected situations.
 If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4 Power tool use and care
 Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
 Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
 Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
 Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5 Service
 Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 SPECIAL SAFETY REGULATIONS FOR CORDLESS GRASS/HEDGE
SHEAR
6.1 Shrub shears safety warning
 Keep all parts of the body away from the cutter blade. Do not remove cut material or hold
material to be cut when blades are moving.
 Make sure the switch is off when clearing jammed material. A moment of inattention while
operating the machine may result in serious personal injury.
 Carry the machine by the handle with the cutter blade stopped. When transporting or
storing the machine always fit the cutting device cover. Proper handling of the machine will
reduce possible personal injury from the cutter blades.
 Keep cables away from cutting area. During operation the cable may be hidden in shrubs
and can be accidentally cut by the blade.
6.2 Grass shears safety warning
 Keep supply and extension cords away from cutting means.
 Use the machine only in daylight or good artificial light.