Powerplus POWX323 VACUUM CLEANER WET/DRY 1200W EN - Manual (Page 8)

POWX323
EN
Copyright © 2013 VARO P a g e | 8 www.varo.com
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
Do not submerge the motor housing in water!
9.2 Cleaning the tub
 Empty and clean the tub (6) after each use.
 Dry the tub carefully after the machine has been used for vacuuming up liquids.
9.3 Cleaning the advanced filter
 Shake out the dust from the filter after each use.
 Remove mesh and clean it carefully.
10 TECHNICAL DATA
Mains Voltage 220-240V
Frequency 50Hz
Power input 1200W
Tub capacity 30 L
Weight 9,3Kg
11 SERVICE DEPARTMENT
 Damaged switches must be replaced by our after-sales service department.
 If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
12 STORAGE
 Thoroughly clean the whole machine and its accessories.
 Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
 Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don’t keep it in plastic bags to avoid humidity build-up.