Powerplus POWX340 WALLPAPER STRIPPER 2200W EN - Manual (Page 4)

POWX340
EN
Copyright © 2014 VARO P a g e | 4 www.varo.com
 Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
 Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
 Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR WALLPAPER
STRIPPERS
 Do not use any other liquid than tap water.
 Do not allow any water to come into contact with electrical sockets or connections.
 Do not use the steam plate on or near any electrical socket.
 Never immerse the unit in water or pour water over it.
 Be careful when working overhead
—hot water may drop down.
 Never modify your unit in any way. Repairs should only be carried out by an authorized
Service Agent.
 Ensure that this device is only operated on level surfaces. Tilting positions are to be
absolutely avoided.
 Always unplug at the mains and wait three minutes before opening filler cap to add more
water.
 Always unplug the unit when not in use.
 Remove the steam pipe only when the device has been switched off for at least 3 minutes.
 Allow the unit to cool before storing.
 Empty the water tank before storing.
 Do not point the device on humans, animals or electrical devices.
 Always check the working surface to see if it is suitable for the device.
 Always take the power plug from the outlet before you fill the device with water.
 Do not use cleaning products, acids or flammable liquids in the device.
 Do not use the device without tank cap.
 Avoid contact of the hot parts of the device.
7 ASSEMBLY
7.1 Assembling the hose and the steam plate
 Fasten the steam pipe to the device and to the steam plate.
7.2 Filling the water tank
 Fill the tank with max. 4.5 l tap water. Do not fill over the maximum. Close the tank
opening by means of the tank lid.