Operation, Cleaning and maintenance, Trouble shooting – Powerplus POWX305 ASH CLEANER 1000W 20L EN User Manual
Page 6: Technical details
POWX305/308
EN
Copyright © 2013 VARO
P a g e
| 6
www.varo.com
8 OPERATION
Before you start the appliance, make sure that the filter bag is in the position.
Unwind the power cord.
Plug the appliance and switch on.
Unplug the appliance after use
When the filter indication show to red, please replace or clean the dust filter.
≤60℃!!! For use with cold ashes only!
9 CLEANING AND MAINTENANCE
Open the container.
Take out the filter bag.
Empty the container.
Wash off the filter bag with cleaning water.
Dry up the filter bag.
Assemble the vacuum cleaner.
Caution: Do not use cleaning agents to clean the plastic parts of the tool. A
mild detergent on a damp cloth is recommended. Water must never come
into contact with the tool.
10 TROUBLE SHOOTING
PROBLEM
CAUSE
ACTION
Motor does not start
-Power cord not firmly plugged
into outlet.
-Outlet damaged.
-Cleaner not switched on.
-Plug unit firmly.
-Check the Outlet.
-Switch on the appliance
Suction power is weaker
-Unit clogged
-Dust filter needs cleaning
-Dust container not in position.
-Filter blocked
-Remove the blockage.
-Clean the dust filter.
-Attach the dust container again
to the cleaner.
-Clean the filter
11 TECHNICAL DETAILS
Model nr.
POWX305
POWX308
Voltage / frequency
220-240V/50Hz
220-240V/50Hz
Power input
1000 W
1200 W
Tank volume
20 litre
20 litre
Tank size
Ø295 mm, height 310 mm
Ø295 mm, height 310 mm
Suction hose
Ø3,85 cm, length 120 cm
Ø3,85 cm, length 120 cm